SJCAM Firmware page Last Updated Sept 23, 2015


 SJCAM Firmware Downloads:

Welcome to the New SJCAM Firmware Download support Section. We are currently still building this page and adding firmware download links so please stay tuned!

We will list the Series Firmware out on this page in this Order:


1) SJCAM SJ5000 Series Firmware

2) SJCAM SJ4000 Series Firmware

3) SJCAM M10 Series Firmware:


1) SJCAM SJ5000 Series Firmware Downloads: 

Below we have listed the latest download links for the SJCAM SJ5000 series action cameras:


1)  SJCAM SJ5000+ Plus Firmware download link and Change Log  (Three Versions: a) v3.2 for models after v2.7, b)   v2.7 for  v2.4 v2.5 v2.6 (1.54″), c) v2.7 for 1.5″  )

2) SJCAM SJ5000 WiFi Firmware download link (9/23)

3) SJCAM SJ5000 (basic) Firmware download link (8/18)



1) SJCAM SJ5000+ Plus:


a) SJCAM SJ5000+ Plus v3.2: SJCAM-SJ5000+_HD74_V3.2_20150909_SJCAM (Version 3.2)

IMPORTANT:  If your camera firmware original version is before V2.6, you can’t update the camera to the latest firmware
b) SJCAM SJ5000+ Version 2.7 (1.54″ LCD):  SJCAM SJ5000 Plus v2.7 for 1.54″ LCD Screen    ( for  v2.4 v2.5 v2.6 earlier SJ5000+ models (1.54″ LCD)
c)  SJCAM SJ5000+ Version 2.7 (1.50″ LCD):   SJCAM_SJ5000plus v2.7 firmware for 1.5″ LCD Screen


9-10 Change log: Resolves the LCD resolution error message when NTSC /  Pal is selected in the menu; Upgraded 2.7 version


Firmware Update Instruction:

1. Format the micro SD card, copy the SJCAM_FWUPDATE.bin to the SD card root directory.

2. Power on the SJ5000 plus camera, enter to the menu, check the firmware version.



3. Press the recording button on the camera top side. It will prompt firmware update like below, just choose

and press recording button to start the upgrade.



4. Wait about 30 seconds, until you see firmware update success.



5. Press the recording button, the camera will be restarted, done.



2) SJCAM SJ5000 WiFi:  FW96655A_SJ5000WIFI_SJCAM_LOGO_20150923_V1.0



SJ5000WIFI SJCAM FW Modify History
Delete the function of burst shot, as there didn’t have enough BUF, or the camera will be in crash.

1,Change the logo SJCAM into red and white color (Previous color is black and white)
2,Revise the EXIF information of pictures
3,The file wil be locked. If you press the bottom of power shortly when taking vedio.Even loop recording, the file will be not deleted.
4,Modify the menu of multi language
Support following language
5, Spanish
8,Simplied Chinese
10,Traditional Chinese


5, Modify the setting menu, as some operation without keypad tone
6,Add the function of continous shot
7,Change frequency of light source to 50HZ
8,Solve the problem of black screen when connecting with wifi and taking vedio via APP (without SD card)

3) SJCAM SJ5000: SJCAM SJ5000 8-28 Firmware Download




2) SJCAM SJ4000 Series Firmware Downloads: 

SJ4000 Firmware Index:

1) SJCAM SJ4000+ Plus (With Changelog)
2) SJCAM SJ4000 WiFi
3) SJCAM SJ4000 (Basic)


1) SJCAM SJ4000+ 2K Download Link: SJCAM001_SJ4000+_SJCAM_LOGO_150819_V2.2  (uploaded Sept 10)


1) Adds the rotation function

2) improves the performance of gyro anti-shake function


SJ4000+ Plus FW Firmware Change log:
1,Improve the performance of image stabilization
2,Make image stabilization on as default setting (remark:Open this function, it will increase the power consumption and make the view angle to be smaller)
3,Set the default date as 2015.01.01

1,Change the zoom function from 2.8 to 4.0
2,Make image stabilization off as default setting (remark:Open this function, it will increase the power consumption and make the view angle to be smaller)
3,Solve the problem of probabilistic system halted when connecting with wifi and taking vedio
4, Get rid of abnormal reminding of “NO Card” in Japanese

1,Solve the problem of probabilistic cease when connecting with wifi and taking vedio
2,Change the IQ at night to cut down hot pixels
3,Revise some other small functional defect

1,Solve the problem of synchronous picture when using APP to take vedio under the condition of without card.
2,Solve the problem of probabilistic system halted when switching mode by using APP
3,Add the language of Turkish, camera support the language below:
English // 60HZ USA , 50HZ UK
French // 50HZ
German // 50HZ
Spanish //50HZ
Italian //50
Portuguese //50
Simplied Chinese //50
Japanese //50 OR 60
Traditional Chinese //60
Russian //50
Korean //60
Polish //50
Chech //50
Slovak //50
Hungarian //50
Danish //50
Dutch //50
turkish //50

4,Default the frequency of light source as 50HZ
5,Revise some other small functional defect

Resolve the problem of resolution ratio and make the new setting can be savable


Solve the problem of probabilistic system halted when turning off the wifi

Modify the problem of flash back when using the APP

1、 Resolve the problem of system halted when changing into 720p 60fps (finish)

2、Modify the APP to avoid the problem of switching into 2M HD (not finish)

3、Modify the malfunction of exposure compensation (not finish)

4、Solve the problem of time lapse 3S 5S 10S 20S (finish)

5、The system will be halted or unstable when changing the model (finish)

6、Since there have an icon on the sreen of displaying logo, it is unnecessary to add the function of immediately shut down in auto off (change it in succeeding version)

7、 It always have the reminding of connection failure even restart the camera when entering the real time vedio recording (change it in succeeding version)

8、 Solve Malfunction of timing off

9,Modify the defect of locked file when taking vedio
10,Solve the problem of loop recording, it will not stop even the volume reach 4GB
11,Get rid of the abnormal phenomenon under 2M HD when connectiong to the wifi

1,Supplement the language list as below:
Simplied Chinese
Traditional Chinese
2,Solve the problem Vehicle model
3,Modify the defect of encryption by models
4, Change the logo

20150528:FW96660A_SJ4000+_2015052801_ with function of encryption

1,Add the function of encryption
2,Delete 4K
3,Solve the problem of system halted under 720p 60fps when connecting to APP

20150525:FW96660A_SJ4000+_2015052501_ without function of encryption

1,Modify the defect of front center when entering the menu of format or delete
2,Solve problem of without voice when connecting to TV by HDMI cable
3,Change the wifi bit stream to 150KB and increase the wifi distance
4, Modify the defect of without voice when taking photo
5,Improve the effect of vedio under 720p 120fps

20150521:FW96660A_SJ4000+_2015052101_without function of encryption

1,Get rid of blurred screen in previous version when connecting to wifi under 1080p 60fps
2,Solve the problem of resolution ratio which not in consistant with APP
3,Change the wifi bit stream to 150KB and increase the wifi distance




2) SJCAM SJ4000 WiFi Firmware Download Link: SJCAM SJ4000 WiFi 8-28 Firmware


3) SJCAM SJ4000 Firmware Download link: SJCAM_SJ4000_firmware_update_6.24




3) SJCAM M10 Series Firmware Downloads: 

SJCAM M10Plus  


M10+ Plus 2K Firmware

Download Link: sjcam-m10-plus-2k_updated-firmware-Sept-8

Sept 8 firmware adds Rotation function to M10+ 2K



Download Link: SJCAM M10WiFi Firmware Download Link   (Released August 11, 2015)



Download Link: SJCAM M10 Updated Firmware Link    (Released August 11, 2015)


SJCAM Firmware Update Instructions

  1. Format the MicroSD Card, unzip the firmware file.
  2. Copy the firmware file(s) (.bin) onto the root of the MicroSD Card
  3. Connect the camera with charger, the camera will be upgraded automatically
  4. After the firmware update is completed be sure to delete the files or  you will be prompted to upgrade again